Why Use Coolant ?
The purpose of coolant is to remove excess heat produced from
the engine operation, to control corrosion, scaling, antifreeze
and boilover the radiator water. Years ago water was used to reduce
the temperature. Water is an effective heat transfer fluid but
it boils at low temperature (100 degree celcuis) and highly corrosive.
The important feature of the most coolant is its higher boiling
point. A 50% concentration of ethylene glycol coolant raises the
boiling point of the water-mixture 129 degree celcuis and 70%
concentration of ethylene glycol coolant raises 135 degree celcuis
(using a 15 lbs pressure cap in good condition). The complexity
is increased with the use of aluminium alloys in the head, block,
water pump and radiator of the cooling system. To protect against
the heat, corrosion of aluminium and the other metals & scaling;
our coolant having a special corrosion inhibitors technology.
Coolant is concentrate (1:3) Antifreeze/Coolant.
Coolant is Ready to Use Antifreeze/Coolant.
Coolant is always tested before despatch as per ASTM
D-1384 and other interantional standard.